Celect DRF3 Wireless Digital Programmable Room Thermostat

The Thermsave DRT3 Digital Wireless Programmable Room Thermostat with large LCD screen. This unit will replace most common residential thermostats and is designed to be used with electric, gas or oil heating systems and is perfect for the control of Combi/Condensing Boilers. It is ideally suited for the replacement & updating of existing analogue or digital thermostats that do not offer the facility of "set" back temperature ( this enables you to customise the set temperature to your specific requirements at your chosen times of the day as your lifestyle demands, and assists to obtain maximum system economy & efficiency) Unlike ordinary single unit design thermostats, this unit is a new type of thermostat separating the thermostat function into two units. Receiver and Control Centre. The receiver serves for wiring connections and heat/cool on/off control. With the thermostat having the facility of being in any room or area up to 60M away without the need for wiring back to the receiver. Address settings is also avaivable for units in close vacinity in case of multiple wireless thermostat

* Large LCD screen
* 5/1/1day programming
* RF range 60-100m dependant on conditions
* Transmitter Power 2 AA batteries
* Receiver 240VAC 50HZ with volt free switching
* Relay 230VAC 16Amp
* Temperature range 5degC to 35deg C.
* User selectable Celsius or Fahrenheit temperature.
* Size Transmitter 115mm×90mm×16mm
Receiver 88mm×88mm×40 mm